Denon DVD-2910, DVD-955 74

ENGLISH

Symptom		Check	Page

	•	Check the HDMI/DVI connection.(Check the status of the HDMI/DVI-related indicators.)	16, 17
	•	Check whether the connected monitor equipment or other equipment supports HDCP.	16, 17
		(The DVD-2910/955 will not output a video signal unless the other equipment supports
An image is not projected with an		HDCP.)
An image is not projected with an	•	Check the settings of “HDMI/DVI SELECT”.	49
HDMI/DVI connection.	•	Check the settings of “HDMI/DVI SELECT”.	49
HDMI/DVI connection.	•	Check whether the output format of the DVD-2910/955 (HDMI/DVI FORMAT) matches	16, 17
	•		16, 17
		the supported input format of other connected equipment.
	•	Check whether the video output setting at “PURE DIRECT” is set to “VIDEO: OFF” or	43, 44
		“ALL OFF”.

	•	Check that the batteries are inserted in the proper “<” and “>” directions.	20
	•	The batteries are dead. Replace them with new batteries.	20
Remote control unit does not operate.	•	Point the remote control unit at the remote control sensor when operating it.	20
Remote control unit does not operate.	•	Operate the remote control unit within a distance of 7 meters from the remote control	20
	•		20
		sensor.
	•	Remove the obstacle between the remote control unit and remote control sensor.	20