ENGLISH

(4) Connecting a basic 5.1-channel surround system

Analog 5.1-channel audio signals can be output from the DVD-2910/955.

The multichannel audio signals recorded in packed PCM and the multichannel Super audio CDs can be played when an AV amplifier equipped with analog 5.1-channel audio inputs is connected.

To power outlet

DVD-2910/955

Front speaker (left)

SURROUND

SUBWOOFER

CENTER

FRONT

Center speaker

Front speaker (right)

Subwoofer

Surround speaker (left)

Surround speaker (right)

AV amplifier with 5.1-channel input terminals

NOTES:

For multi-channel connections, set “AUDIO CHANNEL” under “AUDIO SETUP” at “SETUP” to “MULTI CHANNEL” and make the “SPEAKER CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME” settings. (See pages 34 ~ 38.)

With the DVD-2910/955, we recommend turning the digital output off by using the PURE DIRECT MODE and only outputting analog signals in order to keep interference from the digital output circuitry to a minimum and allow you to enjoy high-quality multi-channel sound thanks to the high-bit, high sampling frequency. (See pages 43, 44.)

14