Denon DVD-2910, DVD-955 manual 15

ENGLISH

(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)

✽Set the “AUDIO SETUP” default setting as shown below. (See pages 34 ~ 37.)

• “DIGITAL OUT” → “PCM” “LPCM (44.1kHz/48kHz)” → “ON”

Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.

	B
DVD-2910/955
	Digital audio	Digital audio
Optical fiber cable (commercially available)	input connector	input connector
	(OPTICAL)	(COAXIAL)

(or)

75Ω/ohms pin-plug cable (commercially available)

NOTE:

• Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs.

(6) Connecting to a Stereo Component

Stereo component

DVD-2910/955

NOTE:

•When connecting to a 2-channel audio stereo device using the 5.1ch AUDIO OUT, set “AUDIO CHANNEL” under “AUDIO SETUP” on the “SETUP” menu to “2CH (SRS OFF)” or “2CH (SRS ON)” (See page 34.). For multi-channel sources, the signals are down-mixed into two channels (analog).

(Only the front left and right channels are output for sources for which down-mixing is prohibited.)

15