ENGLISH

(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors

Color component output connectors (PR/CR, PB/CB and Y)

The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful reproduction of the colors.

•The color component input connectors may be marked differently on some TVs or monitors (PR, PB and Y/R- Y, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV’s operating instructions.

•Connect in this way if your TV is compatible with Progressive Scan.

DVD-2910/955

To power outlet

L

R

Y PB/CB PR/CR

AUDIO IN

COMPONENT VIDEO IN

TV

NOTES:

•Use the three commercially available video cords to connect the DVD-2910/955’s color component output connectors to the TV or monitor.

•Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to comply with your TV’s video format. When the TV is NTSC formatted set to NTSC. (See pages 32, 33.)

•Set the “VIDEO OUT” in “VIDEO SETUP” in “SETUP” to comply with Progressive TV.

•To use with 5.1ch audio output, set “2CH (SRS OFF)” or “2CH (SRS ON)” in “AUDIO CHANNEL” in “AUDIO SETUP” in “SETUP” at the initial settings. (See page 34.)

•Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 32.)

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT.

11