ENGLISH

(5)Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)

✽Set the “AUDIO SETUP” default setting as shown below. (See page 36.)

• “DIGITAL OUT” → “PCM” “LPCM (44.1kHz/48kHz)” → “ON”

Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.

DVD-5900

B

Digital audio

Digital audio

input connector

input connector

(OPTICAL)

(COAXIAL)

Optical fiber cable (commercially available)

 

(or)

 

75Ω/ohms pin-plug cable (commercially available)

 

NOTE:

• Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs.

(6) Connecting to a Stereo Component

DVD-5900

Stereo component

NOTE:

•When connecting to a 2-channel audio stereo device, set “AUDIO CHANNEL” under “AUDIO SETUP” at “SETUP” to “2 CHANNEL” (see page 33). For multi-channel sources, the signals are down-mixed into two channels (analog).

(Only the front left and right channels are output for sources for which down-mixing is prohibited.)

15