Specifications Troubleshooting Information Playback Setup Connections Started Getting

Connecting Equipment with HDMI connectors

With HDMI connections, the video and audio signals can be transferred with a single cable.

Connecting an HDMI-compatible player

nConnecting a TV directly to the DVP-602CI

PlayerTV

)%.*

)%.*

065

*/

The DVP-602CI does not support the HDMI control (CEC) function. When using the HDMI control function with a device other than the DVP-602CI, connect an HDMI control–compatible device to the MONITOR 1 terminal.



nConnecting a TV to the DVP-602CI via an AV amplifier

 

 

 

Player

AV amplifier

)%.*

)%.*

)%.*

065

*/

065

TV

)%.*

*/

b The DVP-602CI is supported to the feature of HDMI listed below.

30 and 36 bit Deep Color

x.v.Color z

Auto Lip Sync Correction

z: “x.v.Color” is trademark of Sony Corporation

The DVP-602CI can transmit the following sound formats.

Compatible audio

Details

Discs

format

(examples)

 

 

 

 

2-channel linear PCM

2ch 32-192 kHz

CD, DVD-Video,

16/20/24 bits

DVD-Audio

 

 

 

Multi-channel linear

8ch 32-192 kHz

DVD-Audio

PCM

16/20/24 bits

 

 

 

 

Dolby Digital, DTS

Bitstream

DVD-Video

 

 

 

 

2/5.1ch

 

DSD

2.8224 MHz

SACD

 

1 bit

 

 

 

 

Dolby Digital Plus,

 

HD DVD,

Dolby TrueHD,

Bitstream

Blu-ray Disc

DTS-HD

 

 

 

 

 

 

Audio playback is not possible with the DVP-602CI.

There can be no sound output from the HDMI terminal when the “Resolution” under “Source Select” – “Video Setup” on the DVP- 602CI GUI menu is set to 480p/576p, VGA, SVGA, XGA (vpage 22).

Copyright protection system (HDCP)

In order to play the digital video and audio signals of a DVD- Video or DVD-Audio disc using HDMI/DVI connections, both the connected DVD player and monitor must be equipped for a copyright protection system called “HDCP” (High-bandwidth Digital Content Protection). HDCP is a copy protection technology consisting of data encoding and mutual identification of the devices.

The DVP-602CI is HDCP-compatible. For details on the DVD player or monitor you are using, refer to its operating instructions.

NOTE

Use a CPPM-compatible DVD player to play DVD-Audio discs that are copyright-protected by CPPM.

The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted by the connected device.

Video signals are not output properly when using devices that are not HDCP-compatible.

Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, switch the DVD player’s resolution to a resolution with which the monitor is compatible.

Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product).

If the monitor or DVD player does not support deep color, deep color signal transfer is not possible.

If the monitor or DVD player does not support x.v.Color, x.v.Color signal transfer is not possible.

If the monitor does not support “Auto Lip Sync Correction” function, this function will not work.

Use a Deep Color compatible cable for connection to Deep Color compatible devices.