External Controller

 

Connecting the Power Cord

 

 

 

 

Wait until all connections have been completed before connecting the power cord.

Getting

RS-232C connector

This connector is used for an external controller.

b If you wish to control the DVP-602CI from

an external controller using the RS-232C

connector, perform the operation below

beforehand.

q Turn on the DVP-602CI’s power. w Turn off the DVP-602CI’s power from the

external controller.

e Check that the DVP-602CI is in the standby mode.

Power cord

To household

power outlet

(included)

 

North America model

AC 120 V, 60 Hz

European models

AC 230 V, 50 Hz

Playback Setup Connections Started

Trigger output jack

The power of an external device equipped with a trigger input jack can be turned on and off in association with operations on the DVP-602CI. For details, see GUI menu “Setup” – “Option Setup” – “Trigger Out” (vpage 20).

•Output level: 250 mA / 12 V

Check the trigger input conditions of the connected device.

NOTE

Insert the AC plugs securely. Incomplete connections could cause noise.

Once Connections are Completed

Turning the Power On (vpage 24)

Specifications Troubleshooting Information

"69

Input

Output

 

065

Extension jack for future use.

 

 

 

 

 

Infrared

Infrared sensor

 

retransmitter

 

 

14