Specifications Troubleshooting Information Playback Setup Connections Started Getting

Connections to Other Devices

Carefully check the inputs and outputs, and be sure to interconnect correctly.

Network

For firmware update and web control.

Computer

Internet Modem

To WAN side

 

To LAN port

 

To LAN port

LAN port /

Ethernet

 

 

connector

Router

Required systemnBroadband Internet connection

A broadband line connection to the Internet is required in order to use the DVP-602CI’s firmware update.

nModem

This is a device that is connected to the broadband line to communicate with the Internet. Some are integrated with the router.

nRouter

When using the DVP-602CI, we recommend you use a router equipped with the following functions:

·Built-in DHCP (Dynamic Host Configuration Protocol) server This function automatically assigns IP addresses on the LAN.

·Built-in 100BASE-TX switch

When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater.

nEthernet cable (CAT-5 or greater recommended)

The DVP-602CI does not come with an Ethernet cable.

Some flat type Ethernet cables are easily affected by noise. We recommend using a normal type cable.

If the sound is broken in an environment in which there is much power supply noise from electric products or in a noisy network environment, use a shielded type Ethernet cable (For America Canada model).

For the Ethernet cable, used a shielded twisted pair (STP) cable. Do not use an unshielded twisted pair (UTP) cable, as it may exceed noise standard limits (For European model).

nComputer

A computer with the following specifications is required to use a web control:

OS

Windows® XP Service Pack2, Windows Vista

Internet browser

Microsoft Internet Explorer 5.01 or later

LAN port

300 MB or more free disk space

For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop.

NOTE

A contract with an ISP is required to connect to the Internet.

No additional contract is needed if you already have a broadband connection to the Internet.

The types of routers that can be used depend on the ISP. Contact an ISP or a computer shop for details.

nOthers

If you have an Internet provider contract for a line on which network settings are made manually, make the settings at GUI menu “Setup” – “Network Setup” (vpage 18, 19).

With the DVP-602CI, it is possible to use the DHCP and Auto IP functions to make the network settings automatically.

When using a broadband router (DHCP function), the DVP-602CI sets the IP address, etc., automatically.

When using the DVP-602CI connected to a network with no DHCP function, make the settings for the IP address, etc., at GUI menu “Setup” – “Network Setup” (vpage 18, 19).

The DVP-602CI is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a line of the type with which the PPPoE is set.

Depending on the ISP with which you have your contract, it may be necessary to make proxy server settings to use the Network function. If you made proxy server settings on the computer to connect to the Internet, make the proxy server settings on the DVP-602CI in the same way.

13