Setup Connections Started Getting

Setup

Make detail settings for various parameters.

HDMI Setup

Make settings for HDMI video/audio output.

sRGB Range

Make settings for RGB output range.

[Selectable items] Normal Enhanced

•When “YCbCr” is selected under “Color Space”, “RGB Range” will have no effect.

•The computer resolution output will be “Enhanced” irrespective of this setting.

gMonitor Out

Make settings for HDMI monitor output.

[Selectable items] Auto (Dual) Monitor 1 Monitor 2Operating from the remote control unit

Press the MONITOR SEL button.

 

 

 

 

 

 

 

Auto (Dual)

 

 

Monitor 1

 

 

 

 

 

Monitor 2

 

 

 

 

 

 

 

 

Specifications Troubleshooting Information Playback

FMenu tree F

Setup

HDMI Setup

aColor Space s RGB Range

d Vertical Stretch f Auto Lip Sync

gMonitor Out

aColor Space

Make settings for output color space.

[Selectable items] YCbCr RGB

When connected to a monitor with a DVI-D connector (HDCP compatible) using an HDMI/DVI converter cable, the signals are output in RGB format, regardless of this setting.



dVertical Stretch

The image is displayed in full-screen.

[Selectable items]

ON

 

OFF

fAuto Lip Sync

Automatic compensation for timing shift in audio and video output.

[Selectable items]

ON

 

OFF

 

 

 

 

Auto Lip Sync only works when connected to a TV which supports HDMI Lip Sync.

•When “Monitor Out” is set to “Auto (Dual)”, connections with the MONITOR 1 or MONITOR 2 connectors are recognized automatically.

•If both the MONITOR 1 and 2 connectors are connected and “Resolution” is set to “Auto”, the signals are output with a resolution compatible with both monitors.

•If “Resolution” is set to something other than “Auto”, check the resolutions with which your monitor is compatible at GUI menu “Information” – “HDMI Information” – “Monitor 1” and “Monitor 2” and set accordingly (vpage 24).

•When “Monitor Out” is set to “Auto (Dual)”, and a not supported sound format is input to Monitor 1 and Monitor 2, the sound is not output from both terminals.

•The “Auto (Dual)” function may not operate normally depending on the device connected to the monitor output terminal. Under the circumstances, set either “Monitor 1” or “Monitor 2”.