Denon DVP-602CI dTrigger Out, hMaintenance Mode, fDimmer, jFirmware Update, gSetup Lock

Wall Paper

Change the GUI background.

[Selectable items] Picture Black Gray Blue

Format

Select the video output signal format to match the monitor.

[Selectable items]

NTSC PAL (for North America model)

dTrigger Out

Select the conditions to turn on the trigger out with respect to the input source, HDMI monitor, etc.

For details about the trigger out function, see page 14.

[Selectable items] ON – – –

Setting with Respect to the Input Source

When the input source set to on is selected, the trigger out turns on.

hMaintenance Mode

This sets the function for maintenance by a DENON serviceperson or installer. (For professional use only.)

This function allows a DENON serviceperson or installer to check the DVP-602CI’s status and make settings via the Internet.

NOTE

Only use this function if so instructed by a DENON serviceperson or installer.

Connections Started Getting

PAL NTSC (for European model)

NOTE

When a format other than the video format of the connected monitor is set, the picture will not be displayed properly. Use the procedure described below to change the video format.

Operating from the main unit

The GUI menu is not displayed when performing this setting.

Setting with Respect to the Monitor

When the HDMI monitor set to on is selected, the trigger out turns on.

fDimmer

Adjust display brightness of the receiver.

jFirmware Update

Update the firmware of the receiver.

Check for Update

You can check for firmware updates. You can also check approximately how long it will take to complete an update.

Information Playback Setup

b

q Press and hold the ENTER and RETURN buttons for at least 3 seconds.

“Video Format” appears on the display.

wUse the o p button to make the setting.

e Press the ENTER, SETUP or RETURN button to complete the setting.

Text

Text information display.

[Selectable items] ON OFF

[Selectable items] Bright Dim Dark OFF

Operating from the remote control unit

Press the DIMMER button.

Bright Dim

OFF Dark

gSetup Lock

Protect settings from inadvertent change.

[Selectable items] ON OFF

•When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt to operate related buttons.

⋅GUI menu operations

⋅Resolution

⋅Progressive Mode

⋅Aspect

⋅DNR

⋅Status

•To cancel the setting, press the SETUP button to re-display the “Setup Lock” screen, then change the setting to “OFF”.

Start

Execute the update process.

When updating starts, the power indicator becomes red and the GUI screen is shut down. The amount of update time which has elapsed is displayed.

When updating is complete the power indicator becomes green and normal status is resumed.

bIf the display reads as shown below, check the settings and network environment, then update again.

Display	Description
Updating failed	Updating failed.
Login failed	Failure to log into server.
Server is busy	Server is busy. Wait a while then try again.
Connection fail	Failure connecting to server.

Specifications Troubleshooting

20