Denon PMD340 Name and Operation of Each Part, English, Analog output jacks, Digital output jack

Name and Operation of Each Part *

ENGLISH

zANALOG OUTPUT

(Analog output jacks)

These are the analog signal output jacks. The red jack is the right channel audio output, and the white jack is the left chan- nel audio output jack.

Caution

Do not connect these jacks to the PHONO jacks on an ampli- fier.

xDIGITAL OUTPUT (SPDIF)

(Digital output jack)

The digital signal from the compact disc that is being played is output through this jack.

Connect a device with a digital input jack (such as recording equipment, an amp, or a D/A converter) to this jack through a RCA cable.

Note:

When outputting a digital signal from the PMD331/PMD340, set “D.OUT” in the Preset menu to “On”.

For details on how to make this setting. (See also page 17.)

cFADER START

(Fader start input jack)

An external switch connected to this jack can be used to con- trol disc pause and playback.

(See also page 19.)

On the PMD331/PMD340, this feature is in the CONTROL I/O connector ⁄0.

(See also page18.)

vREMOTE INT/EXT

(RC5 remote control internal/external switch)

When using an infrared remote control transmitter to control this CD player, set this switch to “INT”. When incorporating this CD player into a system by connecting this CD player (for re- mote control) to equipment that is equipped with a RC5 com- patible output, set this switch to “EXT”.

Note:

Please set to “EXT” when you are using this CD player with- out a remote control. The CD player will then not be able to receive signals from another infrared remote control transmit- ter.

-If this CD player is to be connected to equipment that is equipped with a RC5 remote control jack, be certain to connect the “REMOTE CONTROL IN” jack on this unit with the “REMOTE CONTROL OUT” jack on the other unit.

-When this CD player is connected to a cassette recorder or a disc recorder (CD-R, CD-RW, etc.), RC5 provides synchro re cording capabilities. (See also page 15.)

nANALOG BALANCED OUTPUT LEVEL

(Analog balanced output level adjustment)

(PMD331/PMD340 only)

Use a Phillips type screwdriver to adjust the analog balanced output level. Turn the screwdriver clockwise to increase the output level, and turn the screwdriver counterclockwise to de- crease the output level. (Min. level = -11 dBu)

Caution

-Do not use excessive force when turning the screwdriver.

-The output level and channel balance are adjusted when the unit is shipped from the factory. Do not change these adjust- ments inadvertently.

mANALOG BALANCED OUTPUT

(Analog balanced output jacks)

(PMD331/PMD340 only)

Connect a device with analog balanced inputs to these jacks through a cable with XLR connectors.

Note:

When connecting another device to this CD player through these jacks, confirm that the pin assignments of the XLR con- nectors match before making the connection.

If the pin assignments are different, change the connections in the XLR connector cable so that the pin assignments match.

XLR Connector Pin Assignments for this CD Player

1GND

1 2 2 HOT(+)

33 COLD(-)

,DIGITAL OUTPUT (SPDIF)

(Digital balanced output jack) (PMD331/PMD340 only)

Connect a device with a digital balanced input to this jack through a cable with XLR connectors.

Note:

b REMOTE RC5 IN/OUT	The digital format output on this balanced connectors is SPDIF.
(RC5 remote control input/output jack)	Most products that contain an XLR digital input are designed
This CD player can be controlled remotely by connecting this	to accept an AES/EBU format signal. Be aware that the AES/
CD player via a remote control cable to other equipment that	EBU input on some products will not accept SPDIF, even
support RC5.	though the audio data is identical.

*Refer to the figures on the pages at the back of this user’s guide. The callout numbers on the figures correspond to those found in the text.

3