ENGLISH
Playing a CD
Stopping Playback
Press the 
button !3.
Playing a CD Again from the First Track
Press the 
button !7.
Removing a Disc
Press the 
button y to open the disc tray w, and then remove
the disc. Press the 
button y again to close the disc tray w.
Note:
Always close the disc tray w when it is not in use.
Tips:
-There is an “Auto Close” feature for the disc tray w. In the Preset menu, set one of the following for “Auto CLS: OFF” (initial value), 10 seconds, 30 seconds, 60 seconds, or 180 seconds.
-If “Tray Lock:” is displayed and the tray does not open even if the 
button y is pressed while a track is playing or while paused, the tray lock setting is set to “On” (initial value). The setting can be cancelled by switching No.11 “Tray Lock:” on the Preset menu to “Off:.”
Changing the Time Display
Pressing the TIME button u cycles the time display through the following modes:
Track Remaining Time
Track Elapsed Time
Disc Remaining Time
Disc Elapsed Time
Disc Total Time
Playing Time Display Example
Track Remaining Time
Track Elapsed Time
Disc Remaining Time
Disc Elapsed Time
Disc Total Time
Searching (Searching for a Desired Position
in a Track)
-While playing or in pause, press the 
button !8to scan in the forwards direction.
-While playing or in pause, press the 
button !6to scan in the reverse direction.
<During playback> Searching |
|
For the first three seconds after the | button !6or the |
button !8is held down, the CD player scans at slow speed (about 2x normal playing speed).
For the next three seconds, the CD player scans at medium speed (about 4x normal playing speed).
After that, the CD player scans at high speed (about 16x nor- mal playing speed).
<During pause> | Frame Searching | ||
If the | button !6or the | button !8is pressed once, the | |
play position moves one frame. | |||
If the | button !6or the | button !8is held down, the search | |
speed changes through three stages after every three sec- onds, until a maximum speed of 75 frames per second (about 1x normal playing speed) is reached.
Tip:
One frame contains data for about 1/75 of a second of play- back.
Turning the PITCH/SEARCH dial @0has the following effect
(PMD331/PMD340 only):
<When paused> | Frame Searching |
-Each time the PITCH/SEARCH dial @0is turned clockwise, the play position advances one frame.
-Each time the PITCH/SEARCH dial @0is turned counterclockwise, the play position reverses one frame.
-If the PITCH/SEARCH is turned quickly, the search speed changes through three stages until a maximum of 75 frames per second is reached.
Tip:
One frame contains data for about 1/75 of a second of play- back.
8
