Denon PMD331 manual Playback Using the Program Function, Registration, To clear a registered Track

Playback Using the Program Function

ENGLISH

Registration

It is necessary to register the tracks to use the program function.

Procedure (For example, to store P-01, P-02. )

1.Press the button !3to stop playback and then press the PROG button !1.

2.Input the track number to be registered by pressing the

numeric buttons (0 to 9) o		.
At this point, the	/ENTER button !7flashes.

CLEARENTER

To clear a registered Track

Procedure (For example, to clear P-02.)

1.Press the button !3to stop playback, and then press the PROG button !1.

2.The program number “P-01” is displayed.

At this point, the CUE/CLEAR button !5flashes.

CLEARENTER

3.Press the /ENTER button !7.

The specified track number is registered in the program as “P-01”.

Tip:

Input the track number within five seconds. If the track number is not input within five seconds, it is cancelled.

4.The program number than changes to “P-02”.

5.Input the next track number to be registered by pressing the numeric buttons (0 to 9) o.

6.Press the /ENTER button !7.

The specified track number is registered in program “P-02”.

7.The program number than changes to “P-03”.

8.When you have registered all the required tracks, press the PROG button !1or the /EXIT button !3.

The CD player will then exit the program registration mode and enter the program play mode.

Tips:

-A maximum of 20 tracks can be registered in the program.

-To stop program registration, press the PROG button !1or the /EXIT button !3.

-Program play can be switched off via the MODE menu.

3.Press the button !4, so that program number “P-02” is displayed.

Tip:

If the button !4is pressed, the program number that is dis-

played increases by one. If the button !2is pressed, the program number that is displayed decreases by one.

4.Press the CUE/CLEAR button !5.

“P-02” is cleared and “P-02 Trk - -” is displayed on the display .

Switching Program Playback OFF

Procedure

1.Press the MODE button @2.

2.Select the playback mode so that “Program: On” is displayed in the character display portion of the display t.

3.Press either the button !2or the button !4to change the display to “Program: Off”.

4.Press the /ENTER button !7to confirm the setting.

5.Press the /EXIT button !3to exit the playback mode menu.

6.When the button !7is pressed, normal playback begins.

11