TIMER SETUP

Settings for Timer.

F Menu screen F

PM 7:30

aONCE TIMER

Settings for once-only timer.

[Selectable items]

DISABLE : Disable once-only timer.

ENABLE : Enable once-only timer.

nStart Time

Set Timer Start Time. (12-hour display) Example: PM 0:35

nEnd Time

Set Timer End Time. (12-hour display) Example: PM 1:00

nFunction

Select Timer Function.

sEVERY TIMER

Settings for Everyday Timer.

[Selectable items]

DISABLE : Disable Everyday Timer.

ENABLE : Enable Everyday Timer.

nStart Time

Set Timer Start Time. (12-hour display)

Example: PM 0:35

nEnd Time

Set Timer End Time. (12-hour display)

Example: PM 1:00

nFunction

Select Timer Function.

•Be sure to set the current time if you want to use the timer playback function.

•When the function is set to “TUNER”, also set the preset number.

•If the times set for the sleep timer, every timer and once timer overlap, the priority is as follows:

q sleep timer

w once timer

e every timer

Setting the “ONCE TIMER” and “EVERY TIMER”

qPress the o p button to select “TIMER SETUP” icon, then press the ENTER button.

wPress the uibutton to select “ONCE TIMER” or “EVERY TIMER”, then press the ENTER button.

ePress the uibutton to select “ENABLE”.

r Press the uio p button to select start time, end time, and function, then press the ENTER button.

tPress the uibutton to select “EXIT SETUP”, then press the ENTER button.

The timer is turned on and the timer standby indicator “ ” lights.

yPress the ON/STANDBY button. The power indicator turns orange.

ENGLISH

Checking whether or not the timer is enabled

In the standby mode, press the STATUS button.

The status is displayed on the S-102’s display.

1 on/Eoff

(When the once timer is on and the everyday timer is off)

Canceling the timer

Select “DISABLE”.

To turn the timer back on, select “ENABLE”.

Changing the timer settings

Redo the timer setting operation from the beginning.

The previous settings are cleared and replaced with the new settings.

If there has been a power failure

The settings are cleared.

Reset the current time, then make the settings over from the beginning.

dCLOCK SETUP

Set Current Time.

The clock is synchronized with the power supply frequency. It may be off by about 2 to 3 minutes per month.

In such cases, reset the time.

Setting the clock

qPress the o p button to select “TIMER SETUP” icon, then press the ENTER button.

wPress the ENTER button twice to change the current time.

ePress the uio p button to set the current time, then press the ENTER button.

rPress the ENTER button to enter the setting.

•To check the current time when the regular display is displayed, press the STATUS button once.

•The time can be displayed by pressing the STATUS button when the power is in the standby mode. (When this is done, the set is no longer in the low power consumption standby mode.)

When pressed twice while the time is displayed, the display turns off and the set is put back in the low power consumption standby mode.

Troubleshooting Information Control Remote Playback Setup Connections Started Getting

19