Playing Dolby Digital/DTS Multi- Channel Sources (Digital input only)

1Switch the input source (vpage 20). (DVD and AUX1 digital input)

2Use [SURROUND] to select the “DOLBY VS REF” or “DOLBY VS WIDE”.

The “ ” indicator lights.

3Play sources with the or mark sources.The “ ” or “ ” indicator lights, depending on the playback

source's signal format.

4Use [SURROUND PARAMETER] to display the various surround parameters, then select with [o p].

[Selectable items] D.COMP LFE

Playing Dolby Digital/PCM/Analog 2- Channel Sources

1Switch the input source (vpage 20).

2Use [SURROUND] to select the “DOLBY VS REF” or "DOLBY VS WIDE”.

The “” indicator lights.

3

Play sources with the

mark.

 

 

The “

” indicator lights, depending on the playback source's

signal format.

4Use [SURROUND PARAMETER] to display the various surround parameters, then select with [o p].

[Selectable items] D.COMP LFE

To check the currently playing source and various settings

In the stop mode, press [STATUS].

b The playback source and the various surround settings are shown on the display each time the button is pressed.

Listening in the Dolby Headphone Mode

1Switch the input source (vpage 20).

Plug the headphones (sold separately) into the

<PHONES> jack.

The sound from the speakers is automatically cut off.

2Press [SURROUND] to select the “DOLBY H/P”.

The “ ” indicator lights.

3Play the source.

4Use [SURROUND PARAMETER] to display the various surround parameters, then select with [o p].

[Selectable items]

D.COMP LFE CINEMA MUSIC

NOTE

Be careful not to set the volume too high when using headphones.

ENGLISH

Listening to Radio Broadcasts

Tuning in Broadcast Stations

1Press <FUNCTION> or [FM/AM] to select “TUNER”.

2Use <BAND> or [FM/AM] to select the reception band.

FM AUTO FM MONO AM

3Use <+/–>, [TUNING +/–]or [o p] to select thereception frequency.

When a station is received, the “TUNED” indication will light.

A humming sound may be heard when using a TV nearby while receiving AM programs. If this happens, move the system as far from the TV as possible.

Display of the FM broadcast reception status

•When the reception band mode is set to “FM AUTO” and a stereo broadcast is tuned in, the “ST” indicator lights.

•If the signal is weak and stable stereo reception is not possible, set the reception band mode to “FM MONO” and receive the program in monaural. The “MONO” indicator lights.

Main unit <+/–> button

There are two, switchable modes fo <+/–>the tuning mode for setting the reception frequency (setting upon purchase), and the preset mode for selecting the preset broadcast station.

nSwitching the preset mode

Pressing <+> while pressing in <BAND>. “PRESET” is flashes for approximately 5 seconds.

nSwitching the tuning mode

Pressing <–>while pressing in <BAND>. “TUNING” is flashes for approximately 5 seconds.

Auto tuning

When [TUNING +/–]or [op] is pressed and held in, the set automatically starts searching for a broadcast station.

b Stations whose signal is weak cannot be tuned in.

Troubleshooting Information Control Remote Playback Setup Connections Started Getting

27