Setting the Sleep Timer

Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).

1Set the current time (vpage 19).

2During playback, use [SLEEP] to select the time. The “SLEEP” indicator flashes.

120 90 60 50 40 30 20 10

Turns off

b After about 4 seconds, the “SLEEP” indicator stops flashing, remaining lit, and the settings are automatically entered.

3The power is set to the standby mode after the set amount of time.

Canceling the sleep timer

Press [SLEEP] until the “SLEEP” indicator turns off.

b The sleep timer can also be canceled by setting the S-102’s power to the standby mode using ON/STANDBY.

Checking the time remaining until the sleep timer starts

In the stop mode, press [STATUS]. The time is displayed.

b The time can be displayed by pressing [STATUS] when the power is in the standby mode. (When this is done, the set is no longer in the low power consumption standby mode.)

When pressed twice while the time is displayed, the display turns off and the set is put back in the low power consumption standby mode.

If the sleep timer and everyday timer settings overlap, the sleep timer has priority.

Other Functions

Adjusting the Tone

1Select the adjustment mode using [TONE].

BASS TREBLE DEFEAT

2With the name of the item to be adjusted selected, press [o p] to adjust the level.

[Selectable mode]

BASS :

Adjusts the bass sound (–10 dB to +10 dB).

TREBLE :

Adjusts the treble sound (–10 dB to +10 dB).

DEFEAT :

The tone adjustment circuitry can be bypassed to achieve high sound quality. ”0dB“

If no operation is performed within 4 seconds, the display switches back to what was previously displayed.

Turning the Sound Off Temporarily (Muting)

Press [MUTE].

To cancel, either press [MUTE] again or adjust the volume using

VOLUME.

Convenient Functions

Personal Memory Plus Function

This function sets the settings (input mode, surround mode, etc.) last selected for the individual input sources. When you switch to an input source, the settings are automatically set to the ones that were set the last time that input source was used.

ENGLISH

The surround parameters, tone adjustment and the volumes of the

Getting

 

different speakers are stored for the individual surround modes.

Started

 

 

 

 

Last Function Memory

 

 

 

Connections

 

This stores the settings as they were directly before the

 

 

 

 

 

standby mode was set.

 

 

 

When the power is turned back on, the settings are

 

 

 

restored to as they were directly before the standby mode

 

Setup

 

was set.

 

 

 

 

 

 

 

 

Backup Memory

 

Playback

 

The various settings are backed up for about 1 week,

 

 

 

 

 

even if the power is turned off or the power cord is

 

 

 

 

Remote

 

disconnected.

 

 

 

 

 

 

 

Control

 

 

 

 

Auto Power On

 

 

 

 

 

When the power is in the standby mode, the power turns

 

 

 

on simply by pressing <5> or <1>.

 

Information

 

 

 

 

Resetting the Microprocessor

 

 

 

Troubleshooting

 

Perform this procedure if the display is abnormal or if

 

 

 

 

 

operations cannot be performed.

 

 

 

When the microprocessor is reset, all the settings are

 

 

 

reset to their default values.

 

 

 

1Set the standby mode using <ON/STANDBY>.

 

 

 

b Set to the standby mode and wait 5 seconds.

2Press <ON/STANDBY>while simultaneously pressing

<FUNCTION> and <8>.

3Release the three buttons when “INITIALIZE” is displayed.

If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.

31