Desa CGD3924NT, CGD3930NT, CGD3018NT, CGB3924NT, CGB3930NT, CCL3018NT, CCL3924NT, CCL3930NT

Models: CGD3924NT, CGD3930NT, CGD3018NT, CGB3924NT, CGB3930NT, CCL3018NT, CCL3924NT, CCL3930NT

1 42
Download 42 pages 1.89 Kb
Page 17
Image 17
Figure 33 - Installing Crossover Log (#6) (CCL3930NTA Shown)

OWNER’S MANUAL

INSTALLATION

Continued

32.

6.Locate holes on the bottom of cross- over log (#6). Slide these holes onto the right pegs located in middle log (#2) and front log (#1). See Figure 33.

7.For CCL3930NTA only: Locate holes on the bottom of crossover log (#7). Slide onto the pegs located in crossover log (#6) and middle log (#2). See Fig- ure 34.

8.Add lava rock around base of heater. Do not place any lava rock on logs or burner.

6

Pegs

Log #2

Front Log (#1)

Figure 33 - Installing Crossover Log (#6) (CCL3930NTA Shown)

HolesFigure 34 - Installing Crossover Log (#7) to Model CCL3930NTA Only

7

Crossover

Log (#6)

 

Middle

Pegs

Log (#2)

Figure 34 - Installing Crossover Log (#7) to Model CCL3930NTA Only

Single Burner Mountain Oak Models

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

Each log is marked with a number. These numbers will help you identify the log when installing. It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.

1.Place the back log (#1) onto the back of the burner. Make sure the log sits down into the hole in the grate and leans forward onto the two posts in front of the log (see Figure 35).

2.Locate the notches on the underside of the front log (#2). Also notice the re- cesses on the back of log #2. Slide the notches over the tabs on the grate base and the front posts into the recesses on the back (see Figure 36).

3.Place the crossover log (#3) on top of the back log and front log. Make sure the crossover log is seated into the notches on top of the back and front logs (see Figure 37).

4.Add lava rock around base of heater. Do not put lava rock on logs or burner.

Back Log (#1)

Hole in

Grate

Single Burner Mountain Oak ModelsFigure 36 - Installing Front Log Post

Front Log

Figure 37 - Installing Crossover Log(#2)

Recess

Notch

Tabs on

Post

Grate Base

 

Figure 36 - Installing Front Log

Crossover

Log (#3)

Notch

Notch

Figure 37 - Installing Crossover Log
Figure 35 - Installing Back Log

107123

17

For more information, visit www.desatech.com

Page 17
Image 17
Desa CGD3924NT, CGD3930NT, CGD3018NT, CGB3924NT, CGB3930NT, CCL3018NT, CCL3924NT, CCL3930NT Owner’S Manual, Installation