Desa CHDV34(N/P)(A) Owner’S Manual, Product Identification, Local Codes, Product Features

OWNER’S MANUAL

PRODUCT

IDENTIFICATION

Top Louver

Panel

Nailing

Flange

Glass Door

Assembly

Piezo Ignitor

Valve

Lower Louver Panel

Glowing Embers

Blower Adjustment

(Optional Installation)

Vent Opening

Stand-off

Log Set

Lava Rock

Grate

Assembly

ON/OFF/REMOTE Switch (Optional Installation)

LOCAL CODES

Install and use fireplace with care. Follow all local codes. In the absence to local codes, use the current National Fuel Gas Code ANS Z223.1, also known as NFPA 54* (USA) or the current CAN/CGA-B149[.1 or

.2] Installation Codes (Canada).

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

PRODUCT

FEATURES

OPERATION

This direct-vent fireplace is clean burning and vents easily through outside walls or vertically using outside air for combustion. Heat is generated by both realistic flames and glowing embers. When used without the blower accessory, the fireplace requires no electricity making it ideal for emergency back-up heat.

PIEZO IGNITOR

This fireplace has a piezo ignitor. This sys- tem requires no matches, batteries, or other

Figure 1 - Comfort Glow Direct-Vent Fireplace CHDV Series

sources to light fireplace.

GLOSSARY OF

TERMS

Chase - A box-like enclosure to protect venting from the elements when the venting run is on the outside of a structure.

Mastic - A pliable sealent for use around the vent terminal.

Snorkel Termination - A box that raises the horizontal termination above ground level clearances.

Vent Terminal - Mounted on an outside wall or roof to separate the inlet and outlet of the vent system and protect it from weather.

Vinyl Siding Standoff - A metal box that separates the vent cap from vinyl siding.

Wall Thimble/Firestop - A metal plate used to secure the vent pipe when it passes through a wall or ceiling.

105456 3