Desa Door manual Troubleshooting, Technical Service, Regulatory Information, Chime doesnt sound

Troubleshooting

Chime doesn't sound:

¥Make sure pushbutton and chime codes are the same (See pages 2 and 3).

¥Check orientation of pushbutton battery (See page 3).

¥Check charge of pushbutton and chime batteries, replace if necessary.

Batteries seem OK, but the chime doesn't work when installed:

¥Don't mount chime or pushbutton on metal or near metal studs. This re- duces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to move chime or pushbutton off metal surface.

¥Concrete floors may reduce range. Move chime away from floor.

¥Try locating chime closer to pushbutton.

The range of the wireless chime can vary with location, temperature and battery condition.

Technical Service

(Do Not Send Products)

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the problem persists, call* for assistance at 1-

800-858-8501,7:30 AM to 4:30 PM CST (M-F). You may also write* to: DESA Specialty Productsª

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service Specialty Products

*If contacting Technical Service, please have the following information avail- able: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

Regulatory Information

This device (SL-6150-RX, WB-94A-TX) complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the userÕs au- thority to operate the equipment.

-4- 595-5551-09