Desa VSGF33NRA, EFS33NRA Installation, Continued, Installing Front Log, Installing Middle Log

INSTALLATION

Continued

1.Place front log on top of the grate. Make sure the notches in the bottom of the log fit over the grate prongs (see Figure 24). Push back of log flush with metal grate bar.

2.Rest middle log behind metal posts on front burner. Make sure the grooves in the bottom of the log fit over the grate. Bring the log forward next to the metal posts (see Figure 25).

3.Slide the grooves in the back of the rear log against the rear grate prongs. Make sure the peg on the log is on top (see Figure 26).

4.Place the crossover log on the rear log and the middle log. Make sure the peg on the rear log is in the hole in the bottom of the crossover log. The crossover log should fit in the cutout of the middle log (see Figure 27).

5.Install fireplace screen by slipping notches of fireplace screen over screws on front of fireplace (see Figure 28).

WARNING:You must operate this fireplace with the fireplace screen in place. Make sure fire- place screen is in place before running fireplace.

Front Log

Notch

Grate

Prongs

Metal Grate Bar

Figure 24 - Installing Front Log

	Middle Log
Groove
Metal Post	Groove

Metal Post Grate

Figure 25 - Installing Middle Log

	Peg
Groove in	Rear Log
	Groove in
Back of Log
	Back of Log
Grate Prong

Rear
Burner	Grate
	Prong

Figure 26 - Installing Rear Log

Crossover Log

Hole

Cutout Peg

Figure 27 - Installing Crossover Log

Notches

Screws for

Mounting Screen

Figure 28 - Installing Fireplace Screen

107172-01K www.desatech.com 17