Desa EFS33NRA Cleaning And Maintenance, Wiring Diagram, Specifications, Continued, Logs

Models: VSGF33NRA EFS33NRA

1 36
Download 36 pages 61.36 Kb
Page 24
Image 24
Figure 42 - Injector Holder On Outlet

CLEANING AND

MAINTENANCE

Continued

2.Inspect burner, pilot and primary air inlet holes on injector holder for dust and dirt (see Figure 42).

3.Blow air through the ports/slots and holes in the burner.

4.Check the injector holder located at the end of the burner tube again. Remove any large particles of dust, dirt, lint or pet hair with a soft cloth or vacuum cleaner nozzle.

5.Blow air into the primary air holes on the injector holder.

6.In case any large clumps of dust have now been pushed into the burner repeat steps 3 and 4.

Clean the pilot assembly also. A yellow tip on the pilot flame indicates dust and dirt in the pilot as- sembly. There is a small pilot air inlet hole about two inches from where the pilot flame comes out of the pilot assembly (see Figure 43). With the unit off, lightly blow air through the air inlet hole. You may blow through a drinking straw if compressed air is not available.

Ports/

SlotsInjector

Holder

Burner LOGS

Tube

Primary Air WIRING DIAGRAM

Inlet Holes

Figure 42 - Injector Holder On Outlet

Burner Tube

LOGS

If you remove logs for cleaning, refer to Install- ing Logs, page 16, to properly replace logs.

Replace log(s) if broken or chipped (dime-sized or larger).

WIRING DIAGRAM

Note: For proper operation of optional accessories,

the wires from the switch to the control must be

connected exactly as shown.

A

 

UTO

 

O

 

FF

 

ON

 

 

Thermopile

SPECIFICATIONS

MODELS EFS33NR, EFS33NRA,

VSGF33NR AND VSGF33NRA

Btu (Variable)

20,000/33,000

Type Gas

Natural Gas Only

Ignition

Piezo

Pressure Manifold

3.5" W.C.

Inlet Gas Pressure (in. of water)

Maximum

10.5"

Minimum*

5"

Shipping Weight

122 lbs.

* For input adjustment

 

MODELS EFS33PR, EFS33PRA,

VSGF33PR AND VSGF33PRA

Btu (Variable)

20,000/33,000

Type Gas

Propane/LP Only

Ignition

Piezo

Burner SPECIFICATIONS

Tube

Pilot

Assembly MODELS EFS33NR, EFS33NRA,

Pilot Air

Inlet Hole VSGF33NR AND VSGF33NRA

MODELS EFS33PR, EFS33PRA, Ports/Slots

Pressure Manifold

7.9" W.C.

Inlet Gas Pressure (in. of water)

Maximum

13"

Minimum*

11"

Shipping Weight

122 lbs.

* For input adjustment

 

Figure 43 - Pilot Inlet Air Hole

24

www.desatech.com

107172-01K

Page 24
Image 24
Desa VSGF33NRA Cleaning And Maintenance, Wiring Diagram, Specifications, Continued, Logs, MODELS EFS33NR, EFS33NRA