LFP33PRA

UNVENTED PROPANE/LP GAS FIREPLACE

INSTALLATION

Continued

OPTIONAL WIRELESS HAND- HELD REMOTE CONTROL ACCESSORY RM4

Installing Remote Receiver Unit

1.Disconnect switch wires from the con- trol valve.

2.Remove screws and nuts attaching switchplate. Save screws and nuts to attach receiver.

3.Remove switch plate (see Figure 27). Discard after removing.

4.Install remote receiver unit onto remote switch bracket using screws and nuts removed in step 2. See Figure 28.

5.Route wires through hole in the upper portion of the switch plate (Figure 28). Connect wires as shown in Figure 29. (Black and blue wires are not used for this application.)

Remote Switch

Ignitor

Bracket

 

Screw

White Wire

From Receiver

Valve

Red Wire From

Receiver

Figure 29 - Connecting Wires

INSTALLING BATTERIES FOR RM4

Four AA and two AAA batteries (not in- cluded) are required to operate this heater with the wireless hand held remote control set. AA batteries must be installed in the receiver and AAA batteries in the hand-held remote control unit. Note: Only use alka- line batteries.

Installing Batteries in Receiver

1.Locate back of receiver behind the re- mote switch bracket under the firebox bottom.

2.Slide the battery door off of the receiver in the direction of the arrow on the door.

3.Insert the four AA batteries according to Figure 30.

4.Slide the battery door back into position.

Installing Batteries in Hand-Held Remote Control Unit

1.Remove battery cover on front of re- mote control unit following direction of arrow.

2.Insert two AAA batteries following dia- gram in battery housing area.

3.Replace battery cover onto remote con- trol unit.

Remote

AAAControl Unit

Batteries

-

+

Battery - +

Cover

Battery

Housing

Figure 31 - Installing Battery in Hand- Held Remote Control Unit

Switch Plate

Wires

Figure 27 - Switch Plate and Wiring Harness

Screws

Terminal

 

Wires

+

-+

+ - -

+

Nuts

Remote Receiver

Remote

AA Batteries

Receiver

 

Battery Door

 

Figure 30 - Installing Battery in Remote Receiver

Figure 28 - Installing Remote Receiver

14

107064

Page 13 Page 15
Page 14
Image 14
Desa LFP33PRA installation manual Optional Wireless HAND- Held Remote Control Accessory RM4, Installing Batteries for RM4
Page 13 Page 15

LFP33PRA specifications

Desa LFP33PRA is a cutting-edge product that has gained attention for its advanced features and innovative technologies. This model stands out in the market for its combination of efficiency and user-friendly design, making it an ideal choice for a diverse range of applications.

One of the main highlights of the LFP33PRA is its robust performance. Equipped with a high-capacity energy storage system, it delivers reliable power support, ensuring that users experience minimal interruptions during operation. This is particularly beneficial for environments where continuous power supply is crucial, such as in industrial settings or for emergency backup purposes.

The incorporation of state-of-the-art lithium iron phosphate (LiFePO4) battery technology sets the LFP33PRA apart from traditional battery systems. This technology not only enhances the longevity of the unit but also contributes to its safety profile. LiFePO4 batteries are known for their thermal stability and higher resistance to overheating, making them a safer choice for users.

Another key characteristic of the Desa LFP33PRA is its impressive energy density. This feature allows the device to store more energy in a smaller, lighter package. As a result, it is easier to transport and install, further increasing its versatility across various sectors. The compact design does not compromise on power output, ensuring high efficiency for all applications.

In terms of technology integration, the LFP33PRA comes with smart monitoring capabilities. Users can conveniently track energy consumption, battery status, and overall performance through a digital interface, allowing for proactive maintenance and optimization of power usage. This feature is particularly advantageous for businesses that prioritize energy management and cost-efficiency.

The design of the LFP33PRA also emphasizes sustainability. By utilizing green technology in its manufacturing process and promoting energy savings during operation, the product aligns with eco-friendly initiatives. This dedication to sustainability resonates well with consumers who are increasingly conscious of their environmental impact.

Overall, the Desa LFP33PRA is a pioneering product that combines innovative technologies, safety, efficiency, and sustainability. Its advanced features and reliable performance make it a valuable addition to both commercial and residential power solutions. Whether for backup power or as a primary energy source, the LFP33PRA is equipped to meet the demands of modern electrical systems.
Top Page Image Contents