CLEANING AND
MAINTENANCE
Continued
Cabinet
Air Passageways
Use a vacuum cleaner or pressurized air to clean.
Exterior
Use a soft cloth dampened with a mild soap and water mixture. Wipe the cabinet to remove dust.
LOGS
•If you remove logs for cleaning, refer to Install- ing Logs, page 11, to properly replace logs.
•Replace log(s) if broken or chipped
MAIN BURNER
Periodically inspect all burner flame holes with the heater running. All slotted burner flame holes should be open with yellow flame present. All round burner flame holes should be open with a small blue flame present. Some burner flame holes may become blocked by debris or rust, with no flame present. If so, turn off heater and let cool. Remove blockage. Blocked burner flame holes will create soot.
Service Hints
When Gas Pressure Is Too Low
• pilot will not stay lit
• burners will have delayed ignition
• heater will not produce specified heat
• propane/LP gas supply may be low
You may feel your gas pressure is too low. If so, contact your local gas supplier.
Technical Service
You may have further questions about installation, operation or troubleshooting. If so, contact DESA Heating Products’Technical Service Department at
You can also visit DESA Heating Products’techni- cal services web site at www.desatech.com.
Specifications
| S26PTA |
| S26NTA |
|
Btu (Variable) | 20,000/26,000 | 20,000/26,000 | ||
Type Gas | Propane/LP Only | Natural Only |
| |
Ignition | Piezo |
| Piezo |
|
Manifold Pressure | 8" W.C. |
| 3.0" W.C. |
|
Inlet Gas Pressure (in. of water) * |
| 10.5" |
| |
Maximum | 14" |
|
| |
Minimum | 11" |
| 5" |
|
Dimensions, Inches (H x W x D) |
| 24 x 27 1/4 x 17 1/4 | ||
Stove | 24 x 27 1/4 x 17 1/4 | |||
Carton | 22 x 31 x 31 | 1/2 | 22 x 31 x 31 | 1/2 |
Weight, pounds | 66 lbs. |
| 66 lbs. |
|
Stove |
|
| ||
Shipping | 80 lbs. |
| 80 lbs. |
|
* For purposes of input adjustment
www.desatech.com | 17 |
