Desa VC36N, C GCDV36NR, VC36P, C GCDV36PR, (V)VC36P Series On/Off Series Model HRC100

OPERATIng fireplace

Continued

On/Off Series Model HRC100

Hold the control button on the hand-held remote until burner turns on. Hold the con- trol button again until burner turns off (see Figure 47).

To Lock press both buttons on hand-held remote control until light stops flashing. Hand- held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed.

To Unlock press both buttons together on hand-held remote control until the light stops flashing. The hand-held remote is now unlocked.

Indicator

LightControl

Button

Figure 47 - On/Off Hand-Held Remote

Control Unit HRC100

Thermostat Series Model

HRC200

The hand-held remote can be operated using either the manual mode (MANU) or thermo- static mode (AUTO) (see Figure 48). To select Fahrenheit/Centigrade mode display, carefully press the ˚C/˚F mode button with the end of a paper clip or similar blunt object.

Manual Mode

1. Press the POWER and LOCK buttons together to turn on the hand-held remote control.

2. Press the MANU button to turn on the fireplace.

3. Press the POWER and LOCK buttons together to turn off the fireplace.

Auto (Thermostatic) Mode

1. Press the POWER and LOCK buttons together to turn on the hand-held remote control.

2. Press AUTO button to select this mode.

3.Set the desired room temperature by pressing the TEMP + or - buttons.

4.Press the POWER and LOCK buttons together to turn off the fireplace

Note: Do not leave the hand-held remote in the AUTO mode close to the fireplace. The radiant heat from the fireplace will turn off the fireplace. Ideally, place the hand-held remote in the center of the room facing towards the fireplace.

Note: Do not hold the hand-held remote for a long time. Body temperature will affect its operation in the AUTO mode.

Digital Display Shows
Temperature and Settings
Locks				Turns
System to
				Hand-Held
Prevent
		AUTO		Remote On
Accidental	ROOM		SET
	TEMP		TEMP	or Off and
Ignition				Allows You
	LOCK	TEMP	POWER	to Choose
Turns				the Manual
Burners	MANU	ºC/ºF	AUTO	Setting
On or Off
				Selects
				AUTO
Increases or				Mode
Decreases
Room				°C/°F Mode
Temperature in
				Button
AUTO Mode

Figure 48 - Thermostat Hand-Held

Remote Control Unit HRC200

Safety Features

When away from home for an extended period of time or as a child safety feature to prevent accidental ignition of the fireplace, the receiver ON/OFF/REMOTE switch should be in the OFF position.

Auto Shutoff Feature

1. If the average room temperature exceeds

82 degrees Fahrenheit (28 degrees Centi- grade), the hand-held remote control will perform a safety override and shut the fireplace off. This feature is not available in the MANU mode.

2. The receiver continuously receives signals from the hand-held remote to control the room temperature. If the hand-held remote is misplaced, obstructed or for any reason cannot transmit to the receiver, the receiver will shut off the fireplace after 8 minutes.

116200-01H www.desatech.com 29