SAFETY INFORMATION
Continued
9.Do not use a blower insert, heat exchanger insert or other ac- cessory not approved for use with this log set.
10.The installation and provisions for combustion and ventilation air must conform with the National Fuel Gas Codes, ANSI Z233.1/ NFPA 54, Section 5.3, Air for Combustion and Ventilation.
11.Do not run log set
•where flammable liquids or vapors are used or stored
•under dusty conditions
12.Do not burn solid fuel in the fireplace after installing the log set. Do not use this log set to cook food or burn paper or other objects.
13.Log set becomes very hot when in use. Keep children and adults away from hot surface to avoid burns or clothing ignition. Log set will remain hot for a time after shutdown. Allow surface to cool before touching.
14.Carefully supervise young children when they are in the room with log set.
15.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.
16.To help prevent breakage, new logs must be
17.Turn log set off and let cool before servicing, installing, or repairing. Only a qualified service person should install, ser- vice, or repair log set.
18.Keep the appliance area clear and free from combustible ma- terials, gasoline and other flammable vapors and liquids.
19.Provide adequate clearances around air openings.
LOCAL CODES
Install and use log set with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
SAFETY INFORMATION
LOCAL CODES 3
PRODUCT IDENTIFICATION
UNPACKING
PRODUCT FEATURE
PRODUCT IDENTIFICATION
Grate Steps
Grate
Burner Burner
Pan Clamp
Burner
Manifold
Figure 1 - Product Identification (VVDA24 Shown)
Hearth Kit Model ________________________
Serial Number __________________________
Log Set Model __________________________
UNPACKING
CAUTION: Do not remove the metal data plates from the burner pan. The data plates contain impor- tant warranty and safety information.
1.Remove logs, hearth kit, pan materials, and hardware from carton.
2.Remove all protective packaging applied to logs and base for shipment.
3.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought the product.
PRODUCT FEATURE
ON/OFF SAFETY VALVE/PILOT
Unit is tested and approved to ANSI
For more information, visit www.desatech.com
901268