Getting Started | Using a Bluetooth wireless headset |
|
|
Using a Bluetooth wireless headset
Your IP Phone 1140 is equipped with a radio system to support Bluetooth
Configuring your phone to work with a Bluetooth headset is called ”pairing”.
Tip: Do not pair more than one headset of the same model, they have identical names in the Paired list.
Prerequisites
Before you can use a Bluetooth headset with your IP Phone 1140, the Bluetooth transmitter in the phone must be enabled. See “Enabling the Bluetooth transmitter” on page 41 for instructions.
Pairing a wireless headset with your phone
1.
If the Bluetooth Setup menu fails to open when you
2.Press the Enter key to activate Bluetooth wireless technology. A check appears to indicate that the feature is activated. The message "BT Enabled" appears at the bottom of the display.
3.Put your Bluetooth headset in its pairing or search mode. The procedure for doing this can be different for each headset; please refer to the documentation that accompanied your headset for more information.
4.Search devices.
a.Ensure that your headset is in Pairing or Search Mode.
b.Press the Right navigation key twice, and highlight the Search button, displayed next to the Search Devices item.
c.Press the Enter key. The message "Searching…." appears. It can take up to two minutes for the search to complete. If the search is successful, the message "Search Completed Found Device(s)" appears, and a list of devices that support Bluetooth wireless technology appear in the Found: list. If the search is not successful, the message "Search Completed. No device found" appears. If this happens, or if the headset times out and exits search/pairing mode, power off the headset, and repeat Search Mode steps.
5.When the name of your headset appears in the Found: box, press the Stop soft key or wait for the search to finish. When the search is complete, the message "Search Completed Found Device(s)" appears.
14 | IP Phone 1140 User Guide |
