Getting Started | Using a Bluetooth wireless headset |
|
|
The message "Set active: “device name” appears. This means the headset named is now the active headset and is used when you press the headset key.
3. Press the Exit soft key to exit to the main display.
How wired and wireless headsets interact
If you connect a Bluetooth wireless headset and a wired headset to the same IP Phone 1140, the two interact as follows:
•
•
If no wireless headset is paired, the wired headset works as normal. Likewise, if a wireless headset is paired with the set, but is not in range, the wired headset works as normal.
If the Use BT headset checkbox is selected, the wireless headset is used as the phone headset.
The Bluetooth wireless headset can work only if it is within range of the phone; as the wireless headset approaches the edge of its radio range, the audio quality degrades and radio interference noise increases. When the wireless headset is in connecting range, the Headset key controls the wireless headset, even if a wired headset is attached. If a wireless headset moves out of connecting range, a special beep sounds in the headset indicating the connection was lost.
Switching between a wired and a wireless headset
If a Bluetooth wireless headset is connected, and you want to use the wired headset, you can switch between the two. It is not necessary to unpair or disable the wireless headset.
You can switch between a wired and wireless headset and back again either when the phone is idle or during an active call.
1.
2.Press the Left/Right navigation key to select the “Use BT Headset” item.
3.Press the Enter key to toggle this option on or off.
A check mark indicates that the wireless headset is used. Clear the check mark to use a wired headset. This option is on (checked) by default.
Unpairing a wireless headset
1.
2.Press the Right navigation key to select the Paired: setting.
3.Ensure that the headset you want to unpair is selected in the Paired list.
4.Press the Right navigation key to select the Unpair Device item, and then press the Enter key.
Your Bluetooth wireless headset is unpaired and removed from the Paired: item list.
16 | IP Phone 1140 User Guide |
