![](/images/new-backgrounds/1240489/24048925x1.webp)
laser remote controls. This is the normal, default operating mode for the DW079 laser unit.
To activate Public Mode:
•After being fully powered off, the laser unit will power up in Public Mode.
OR
•Press and hold the speed/rotation button (E) (open padlock symbol beside the button).
Private Mode ![](/images/new-backgrounds/1240489/24048925xi2.webp)
![](/images/new-backgrounds/1240489/24048925xi3.webp)
The laser unit will only accept commands from the DW0794 remote control designated by the user.
To activate Private Mode:
• Press and hold the scan mode button (F) on the laser |
unit control panel (closed padlock symbol) and at the |
Using the Wireless Remote Control (Fig. 4)
The remote control allows one person to operate and setup the laser from a distance. The remote control features a power button (M), manual mode button (N), four arrows (O, PP), speed/rotation button (Q) and scan mode button (R). Two LED indicator lights are on the remote control: transmit (S) and private mode (T).
REMOTE CONTROL: POWER BUTTON
FIG. 4 | S |
|
N
M
O
P
R Q T
English
same time press and hold the remote control scan |
mode button (R) (closed padlock symbol). |
After 4 seconds, both the laser unit and the remote |
control will enter Private Mode. As confirmation, |
the laser unit will beep and the laser control panel |
LED (L) (next to the closed padlock symbol) and the |
remote control LED (T) (next to the closed padlock |
symbol) will flash. |
No Remote Mode
This mode causes the laser unit to ignore all remote control commands.
To activate No Remote Mode:
•Press and hold the scan mode button (F) on the laser unit control panel (closed padlock symbol), but do not press any button on the remote control.
After 4 seconds, the laser unit will beep and the LED
(L) next to the padlock symbol will flash.
11
Press the remote control power button
(M)to put the laser unit into Sleep Mode. In Sleep Mode all laser unit
functions shut off except for a periodic blink from the power LED
(L)on the control panel of the laser unit. Press the remote control power button again to “wake up” the laser unit.
NOTE: To completely power the laser unit off, the power button on the control panel of the laser unit must be pressed. The laser unit will also automatically power off if it is left in Sleep Mode for 8 hours.
REMOTE CONTROL: MANUAL MODE BUTTON ![](/images/new-backgrounds/1240489/24048925xi13.webp)
To activate Manual Mode, press and hold the remote control manual mode button (N) for 3 seconds. Manual Mode must be activated to use manual sloping. (Refer to Using Manual Slope Mode for a complete description of this function.)
To