In Manual Mode:
The arrow buttons (O) are used to tilt the laser head up or down in the X or Y directions as marked on the protective roll cage of the laser unit.
REMOTE CONTROL: SPEED/ROTATION BUTTON 
The speed/rotation button (Q) is used to adjust the speed of the laser beam through its 4 preset speeds.
NOTE: The speed/rotation button performs the same function as the speed/rotation button on the control panel of the laser unit.
REMOTE CONTROL: SCAN MODE BUTTON 
The scan mode button (R) is used to make the laser head sweep back and forth, creating a short, bright laser line. This short line is much brighter and more visible than when the unit is in full rotation mode.
Using Scan Mode:
To enter Scan Mode, push and release the scan mode button. To exit Scan Mode, push and release the button again.
The size and direction of the scan zone can be controlled with the arrow buttons on the laser unit control panel or the remote control. For a more detailed explanation, refer to Arrow Buttons under Laser Control Panel Buttons.
IMPORTANT: The remote control cannot be used for User Defined Scan Mode.
REMOTE CONTROL: PUBLIC AND PRIVATE MODE
The DW079 Rotary Laser and the DW0794 Remote Control each have the capability to operate in either Public Mode or Private Mode. For the laser and the remote control to work together, they must both be set to the same mode.
Public Mode 
The remote control sends signals that can potentially be received by multiple laser units as well as other models of
13
laser units. This is the normal, default operating mode for the DW0794 remote control.
To activate Public Mode:
•Press and hold the speed/rotation button (Q) (open padlock symbol beside the button) for 4 seconds.
•After an
•After replacement of its battery, the remote control will automatically enter Public Mode.
Private Mode 
The remote control sends signals that can only be received by the designated laser unit.
To activate Private Mode:
•Press and hold the remote control scan mode button
(R)(closed padlock symbol beside the button) and at the same time, press and hold the scan mode button
(F)on the laser unit control panel (closed padlock symbol).
After 4 seconds, both the remote control and the laser unit will enter Private Mode. As confirmation, the laser unit will beep and the laser unit control panel LED (L) (next to the closed padlock symbol) and the remote control LED (T) (next to the closed padlock symbol) will flash.
Height of Instrument Alert
The DW079 has a
English
