•Connect the equipment into an outlet on a circuit differentfrom that which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
These Class B digital devices comply with Canadian ICES-003.
| SPECIFICATIONS | |
Light Source |
| Semiconductor laser diode |
Laser Wavelength |
| 630 – 680 nm Visible |
Laser Power |
| <5mw, CLASS IIIa LASER |
|
| PRODUCT |
Rotation Speed |
| 0 – 600 rpm |
| ± 5° | |
Indoor Visible Range |
| 200' (61 m) diameter |
Range with Detector |
| 1500' (450 m) diameter |
Level Accuracy |
| ± 1/8" per 100' (± 3 mm per 31 m) |
Power Source |
| |
Operating Temperature |
| 23°F to 122°F |
Storage Temperature |
| |
Environmental |
| Water resistant |
Important Safety Instructions for All Battery Packs
When ordering replacement battery packs, be sure to include catalog number and voltage. Consult the chart at the end of this manual for compatibility of chargers and battery packs.
The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Then follow charging procedures outlined.
READ ALL INSTRUCTIONS
•Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Inserting or removing the battery from the charger may ignite the dust or fumes.
•NEVER force battery pack into charger. DO NOT modify battery pack in any way to fit into a
•Charge the battery packs only in DEWALT chargers.
•DO NOT splash or immerse in water or other liquids.
•Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 105°F (40˚) (such as outside sheds or metal buildings in summer).
DANGER: Electrocution hazard. Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Electric shock or electrocution may result. Damaged battery packs should be returned to service center for recycling.
NOTE: Battery storage and carrying caps are provided for use whenever the battery is out of the tool or charger. Remove cap before placing battery in charger or tool.
WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed
battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. without battery cap. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous
English
3
