DeWalt DW708 manual Maintenance, Full Warranty, DAY no Risk Satisfaction Guarantee

English

THUMBSCREW

GROOVING LEVER

FIG. 36	FIG. 38
	SPINDLE
	LOCK

To adjust the tension, loosen, but do not remove, the six screws (Figure 39). Then rotate the set screw on the top of the motor plate casting until the proper tension is achieved. Tighten the six screws securely and replace the belt cover. NOTE: Overtightening the belt will cause premature motor failure.

Maintenance

1.All bearings are sealed ball bearings. They are lubricated for life and need no further maintenance. Do not use WD- 40 or any other lubricant.

2.Periodically clean all dust and wood chips from around the area of the saw. Even though slots are provided to allow debris to pass through, some dust will accumulate.

3.The brushes are designed to give you several years of use. If they ever need replacement follow the instructions on page 9 or return the tool to the nearest service center for repair. Service center locations are packed with your tool.

Important

		To assure product SAFETY and RELIABILITY, repairs,
		maintenance and adjustment (including brush inspection
		and replacement) should be performed by authorized service
		centers or other qualified service organizations, always using
	SET	identical replacement parts.
		Full Warranty
FIG. 37	SCREW
	SCREWS	DEWALT heavy duty industrial tools are warranted for one
		year from date of purchase. We will repair, without charge,
	FIG. 39	any defects due to faulty materials or workmanship. For
		warranty repair information, call 1-800-4-DEWALT. This
		warranty does not apply to accessories or damage caused
		where repairs have been made or attempted by others. This
		warranty gives you specific legal rights and you may have
		other rights which vary in certain states or provinces.
		In addition to the warranty, DEWALT tools are covered by our:
		30 DAY NO RISK SATISFACTION GUARANTEE
		If you are not completely satisfied with the performance of
		your DEWALT heavy duty industrial tool, simply return it to the
		participating seller within 30 days for a full refund. Please
		return the complete unit, transportation prepaid. Proof of
		purchase may be required

CENTER BOSS

16