![](/images/new-backgrounds/1202713/20271365x1.webp)
Chapter 3
Advanced Configuration
Administration > Firmware Upgrade
The Firmware Upgrade screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use.
Administration > Firmware Upgrade
NOTE: The Router may lose the settings you have customized. Before you upgrade its firmware, write down all of your custom settings. After you upgrade its firmware, you will have to re‑enter all of your configuration settings.
Firmware Upgrade
Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website, www.linksysbycisco.com.
Please select a file to upgrade the firmware Click Browse and select the firmware upgrade file.
Start to Upgrade After you have selected the appropriate file, click this button, and follow the
Status > Router
The Router screen displays information about the Router and its current settings.
Status > Router
Router Information
Firmware Version The version number of the Router’s current firmware is displayed.
Firmware Verification The unique identifier that verifies that you have valid firmware is displayed.
Current Time The time set on the Router is displayed.
Internet MAC Address The Router’s MAC Address, as seen by your ISP, is displayed.
Host Name The Host Name of the Router is displayed (if it was entered on the Setup > Basic Setup screen).
Domain Name The Domain Name of the Router is displayed (if it was entered on the Setup > Basic Setup screen).
Internet Connection
This section shows the current network information stored in the Router. The information varies depending on the Internet connection type selected on the Setup > Basic Setup screen.
Select Release IP Address or Renew IP Address as appropriate to release or renew a DHCP lease.
Click Refresh to update the
29 |