DFI 915GM-MIGF Security Option, Apic Mode, MPS Version Control for OS, OS Select for Dram 64MB

Models: 915GM-MIGF

1 121
Download 121 pages 31.41 Kb
Page 67
Image 67

BIOS Setup

Security Option

This field determines when the system will prompt for the password

-everytime the system boots or only when you enter the BIOS setup. Set the password in the Set Supervisor/User Password submenu.

System The system will not boot and access to Setup will be denied unless the correct password is entered at the prompt.

Setup The system will boot, but access to Setup will be denied unless the correct password is entered at the prompt.

APIC Mode

Leave this field in its default setting.

MPS Version Control for OS

This field is used to select the MPS version that the system board is using.

OS Select for DRAM > 64MB

This field allows you to access the memory that is over 64MB in OS/2.

HDD S.M.A.R.T. Capability

The system board supports SMART (Self-Monitoring, Analysis and Reporting Technology) hard drives. SMART is a reliability prediction technology for ATA/IDE and SCSI drives. The drive will provide suffi- cient notice to the system or user to backup data prior to the drive’s failure. The default is Disabled. If you are using hard drives that support S.M.A.R.T., set this field to Enabled. SMART is sup- ported in ATA/33 or later hard drives.

Report No FDD For WIN 95

The options are Yes and No.

3

67

Page 67
Image 67
DFI 915GM-MIGF Security Option, Apic Mode, MPS Version Control for OS, OS Select for Dram 64MB, HDD S.M.A.R.T. Capability