IMG 1010 - Hardware Installation
13

Rack Mounting - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-Hardware
Installation

Overview

The IMG 1010 is shipped with the tray and docking station mated together for easy
mounting. When mounting the chassis, follow these guidelines:
Do not obstruct air flow to the front or the side vent holes towards the rear of
the unit.
Allow approximately 76 cm (2.5 ft.) to slide the field-replaceable tray out.

Mounting Options:

Factory Installed 19" Bracket Position

The IMG 1010 ships with brackets for a 19" inch rack. They are installed in the front
mount position as shown below.
Front Mount (factory default)
The brackets can be positioned and rotated to align bracket ears as required.
There are two mid-mount options. See diagram below showing the two options.
Mounting Ears on bracket facing rear:
Mounting Ears on bracket facing forward: