12.DATA ACQUISITION CIRCUIT CONFIGURATION
Jumper block J13 is used to configure the A/D and D/A circuits on PR-Z32-EA. It is located on the left side of the board next to the data acquisition I/O pin header and is oriented vertically. The functions are shown below and are described in detail on the following page.
The default settings are as shown:
The various configurations are illustrated and described below. For correct configuration, pick one option from the first two configurations (single-ended or differential A/D), one option from the second two configurations (unipolar or bipolar A/D), and one option from the third two configurations (unipolar or bipolar D/A).
Prometheus CPU User Manual V1.44 | Page 45 |
