Diamond Systems PR-Z32-E-ST Panel Board I/O Connectors, Location Type Description, USB a

23.2 Panel Board I/O Connectors

The I/O connectors below are located on the top side of the board and are for connection to external equipment.

Location	Type	Description
J2	DB-9M	Serial port COM1
J4	DB-9M	Serial port COM2
J6	DB-9M	Serial port COM3
J7	DB-9M	Serial port COM4
J10	DB-25F	Parallel port LPT1
J11	2.5mm	+5VDC input power (tip = +, ring = -)
J13	DB-9M	Multi I/O power connector
J14	MD-6	PS/2 mouse connector
J15	MD-6	PS/2 keyboard connector
J18	RJ-45	Ethernet connector
J21	IDC-50	Data acquisition connector (Model PNL-Z32-EA only)
J22	USB A	USB connector
J23	USB A	USB connector
J27	DB-15F	Video (VGA) connector

Panel Board Top Side / External Use I/O Connectors

Additional connectors are on the bottom side and are intended for use with other boards and circuitry inside the enclosure, such as a video board or DC/DC power supply.

Location	Type	Description
J3	Pin header	Speaker and miscellaneous functions
J5	Pin header	Power connection to DC/DC power supply input
J12	Pin header	Power connection to/from DC/DC power supply
J25	Pin header	Pass-through connector for VGA board

Panel Board Bottom Side / Internal Use I/O Connectors

23.3 Panel Board Cables

The panel board ships with a 10-wire video cable (DSC part no. 698010) and a 2-wire power cable (DSC part no. 698011). These are intended for use with the optional accessory video board and a Jupiter-MM (JMM) power supply when these boards are used together with the Prometheus CPU and panel board.

The 10-wire video cable connects the VGA output of the video board to pin header J25 on the panel board. J25 is compatible with a number of companies’ PC/104 video boards that provide a 10-pin connector for the video out.

23.4 Panel Board Hardware

The panel board also comes with mounting hardware for installing it and the CPU into an enclosure such as the Pandora system.

Prometheus CPU User Manual V1.44 Page 65