Digi TS8, 16 Solaris Verifying the RealPort Process, Windows NT Verifying the RealPort Service

Solaris: Verifying the RealPort Process

Use this topic for information on verifying that the RealPort process is running on a Solaris system.

1.Type the following command: ps -efgrep ncxd

2.If the information that appears is not correct, do the following:

a.Modify the /etc/rc2.d/S26realport file with the appropriate IP addresses.

b.Reboot the UNIX server.

Windows NT: Verifying the RealPort Service

Use this procedure to verify the RealPort service on Microsoft Windows NT.

1.From the Start menu, choose Settings > Control Panel > Devices > Digi RealPort.

2.If the RealPort service has not been started, choose Start.

Windows 2000: Verifying the RealPort Service

Use this procedure to verify the RealPort service (process) on Microsoft Windows 2000.

1.Right-click on My Computer, choose Properties > Hardware tab > Device Manager.

2.Expand the Multi-port Serial Adapters list if necessary and select Digi PortServer.

3.If the RealPort Service (process) is not enabled, right-click and choose Enable.

17-14 Verifying the RealPort Process