Configuration capabilities and interfaces
48
Configuration interfaces
Several interfaces are available for configuring Digi devices, including:
The Digi Device Setup Wizard, which helps set up an IP address for the device
and quickly configure features.
The Digi Device Discovery Utility, which locates Digi devices on a network,
and allows opening the web interface for the devices.
A web-based interface embedded with the product, providing device
configuration profiles for quick serial-port configuration and other settings.
For Digi Cellular Family products, the web interface is the preferred interface
for configuration. As all Digi Cellular Family products except
Digi Connect WANIA ship with a default static IP address of 192.168.1.1 for
the Ethernet port. Simply connecting a laptop computer to the Ethernet port
allows direct access to the web interface for configuration.
A command-line interface (CLI).
Connectware Manager, a configuration interface to fine-tune or monitor
Connectware devices. Connectware Manager cannot assign an IP address but it
can change one.
Simple Network Management Protocol (SNMP).