Fireplace Installation
shock or injury to persons, always use a licensed electrician.
WARNING: The supplied mounting components are designed for use with Dimplex fireplaces only. Improper use, or use for purposes other than intended, may cause damage or injury.
Wall Mounting Instructions
WARNING: Failure to install the fireplace as instructed below may result in damage to the equipment and or may expose the user to the risk of fire, serious injury, illness or death.
WARNING: The fireplace requires the wall mounting bracket screws to be installed into a minimum of two wall studs (Figure 1).
Tools Required
•#2 Phillips screwdriver
•Pencil
•Slot screwdriver
•Bubble level (supplied)
•Drill, and drill bits as required
Approximate time: 30 minutes for installation
1.Select an appropriate location to mount the unit on a wall,
Figure 1
610 mm (24")
MINIMUM
1020 mm (40")
RECOMMENDED
Figure 2 |
above an electrical outlet. Access to the electrical outlet must be maintained. Ensure the installation meets the national and state/provincial electrical codes.
!NOTE: It is recommended that the bottom of the unit not be mounted higher than 1020mm (40") from the
Fireplace Installation ground to maintain an optimized viewing angle of the flame.
8 | www.dimplex.com |
