Fireplace Installation
Figure 4 |
Cover Plates |
Figure 5 |
9.Insert the wall anchor screws through the wall bracket and thread into the wall anchors. Tighten the screw (Figure 3).
12.Mount the unit on the wall, so that the tabs on the wall bracket have been inserted into the slots on the back of the firebox. (Figure 5)
13.Mount hardware for frame in- stallation to unit as described in installation guide provided with frame.
14.Carefully pour and evenly dis- tribute the supplied media in the Media tray of the firebox (Figure 6).
15.Hang the frame assembly on the mounting hardware of the firebox and secure by follow- ing the instructions included with frame.
16.Excess electrical cord can be inserted back into the bottom of the unit, into the cord storage area.
10. | Install the remaining screws | Figure 6 |
| through the bracket and into |
|
! | the wall studs as required. |
|
Note: At least two of |
| |
the mounting screws must be |
| |
installed into a wall stud. |
| |
11. | Remove the two (2) cover |
|
| plates from the wall mounting |
|
| slots in the back of the |
|
| firebox. (Figure 4) | Media Tray |
10 |
| www.dimplex.com |
