Fireplace Installation
Pedestal Installation
Instructions
WARNING: Failure to install the fireplace as instructed below may result in damage to the equipment and or may expose the user to the risk of fire, serious injury, illness or death.
CAUTION: High temperature, keep electrical cords, drapery, and other furnishings at least
3 ft (0.9m) from the front of the heater and away from the side and rear.
Tools Required
• #2 Phillips screwdriver
1.Carefully lay the fireplace down on its front.
!Note: If necessary, lay a protective barrier between the front glass and your work surface, (i.e. cloth, cardboard, thick plastic) to avoid scratching the glass or your work surface.
2.Assemble the pedestal by attaching the vertical supports to the base. (Figure 7)
3.Position the pedestal on the back of the firebox so that it lines up with the provided mounting holes.
Figure 7
Verticle
Supports
Base
Figure 8 |
Pedestal |
4.Secure the pedestal to the firebox with the provided screws. (Figure 8)
5.Orient the firebox so that it is standing upright.
6.Mount hardware for trim in- stallation to unit as described in installation guide provided with trim.
7.Carefully pour and evenly dis- tribute the supplied media in
11
