Important Instructions
⑯Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage to the heater.
⑰Although this unit is of zero clearance design, to prevent a possible fire, do not block air intake or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
⑱All electrical heaters have hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored or where the unit will be exposed to flammable vapors.
⑲Do not modify the electric fireplace. Use it only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
⑳Avoid the use of an extension cord. Extension cords may overheat and cause a risk of fire. If you must use an extension cord, the cord shall be No. 14 AWG minimum size and rated not less then 1875 Watts.
㉑Do not burn wood or other materials in the electric fireplace.
㉒Do not strike the fireplace glass.
㉓Always use a certified electrician should new circuits or outlets be required
㉔Always use properly grounded, fused and polarized outlets.
㉕Disconnect all power supply before performing any cleaning, maintenance or relocation of the unit.
㉖When transporting or storing the unit and cord, keep in a dry place, free from excessive vibration and store so as to avoid damage.
SAVE THESE Instructions
5
