Setup and Connections
Step 3: Place Batteries in the Remote Control
Follow these steps whenever you need to install or change the batteries in your TV’s remote control.
1.Remove the cover from the battery compartment.
2.Insert batteries into the battery compartment, matching the + and – end of each battery.
3.Replace the cover.
Step 4: Plug in and Turn on the System
Plug one end of the power cord into the back of the television as shown on right. Plug the other end into a wall outlet. Be sure to insert the plugs completely.
To turn on the TV, press the TV or ON•OFF button on the remote control or the POWER button on the front panel. It may take several seconds for the TV to turn on.
Step 5: Complete the Interactive Setup
Interactive setup appears when you turn on your TV for the first time. Follow the steps to configure the basics of your system, such as setting up the time and day, searching for available channels, and setting up speakers. To run it again, select Assistance from the main menu, then select Interactive Setup. For more details, see the section “Getting Assistance” in this book.
Step 6: Order Programming
You should decide if you would like to receive DIRECTV® programming*. To receive DIRECTV® programming, your satellite dish antenna must be installed and pointed correctly. You must also contact your service provider, DIRECTV.
Programming with DIRECTV: Call
*Receipt of DIRECTV programming is subject to the terms of the DIRECTV Customer Agreement, a copy is provided at DIRECTV.com and in your first bill. DIRECTV and the Cyclone Design logo are trademarks of DIRECTV, Inc., a unit of Hughes Electronics Corp., and are used with permission.
POWER
TV
When you order programming, you need to know your access card number. To get the number, select Assistance from the main menu and then select System Test.
Wait for the system to run all of its tests. The access card number is displayed at the end of the system test.
Write the access card number in the space below for easy reference:
__________________
18 | Chapter 1 |
