DIRECTV PLUS SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER’S MANUAL

You can perform the PreSelect capability from within the on-screen guides. Simply highlight the

program you want schedule and press the key. Each press of the key cycles through the available options.

To View will mark the selected program to be automatically tuned in when it airs. At the right time the digital satellite receiver will turn on and tune to the appropriate channel. Your selected programs will be identified on the on-screen guide with a check mark (ü) before the program title.

To Tape is on offered on the HIRD-E2 model. It is very similar to To View; however, if you have connected your VCR to the digital satellite receiver via the IR cable and have properly set the VCR code from the Setup Menu, the chosen program will be recorded at the correct time. If the digital satellite receiver turned itself on to record the program, it will also remember to turn itself back off after the program ends. Programs you have scheduled for taping will be identified with a videotape icon ( ) before the program title in the on-screen guide.

When using the PreSelect To Tape feature the following steps must be completed for the digital satellite receiver to perform unattended recording:

∙Attach the VCR Control cable as described in the chapter “Setting Up Your DIRECTV PLUS System.”

∙Use the VCR SETUP screen as described in the chapter “The Digital Satellite Receiver’s Menu System.”

∙Set your VCR to match the output of the digital satellite receiver. This could be either RF (channel 3 or 4) or A/V (phono or S-video).

∙Insert a recordable videotape of sufficient length in the VCR.

∙Leave the VCR turned ON.

Don’t Schedule is used if you initiate the drop-down menu and then choose not to schedule anything.

PreSelect To View

The PreSelect To View option appears when the unattended recording capability is not available (such as with the model HIRD-E1 digital satellite receiver) or when a program is not authorized for taping. In this case, the digital satellite receiver can still be scheduled to tune to it when it comes on.

Cancel PreSelect

Once a program has been scheduled for viewing, previewing, or taping, you have the option of canceling the action. Schedules can also be canceled directly from the on-screen guide by highlighting

a scheduled program and pressing the key.

If you wish to switch between To View and To Tape or vice versa, you must cancel the current selection first, then choose the newly desired action. Canceling a scheduled program will also remove the check mark or videotape icon preceding the program title on the on-screen guide.

If the program is currently airing, you will need to delete the event from the SCHEDULER screen accessed from the MAIN MENU.

Buy

Buy is used for pay per view programming. The price of the event is displayed under the title of the

selected program. After highlighting the button and pressing , you will be given the opportunity to confirm your purchase.

If you are not authorized to make the purchase directly from the digital satellite receiver, you will need to contact DIRECTV for assistance.

PAGE 6-10

Page 53 Page 55
Page 54
Image 54
DirecTV HIRD-E25, HIRD-E11 owner manual PreSelect To View, Cancel PreSelect, Buy
Page 53 Page 55

HIRD-E11, HIRD-E25 specifications

The DirecTV HIRD-E11 and HIRD-E25 are cutting-edge satellite receivers designed to enhance the television viewing experience by delivering high-quality content and versatile functionalities. Both models cater to the evolving needs of consumers, integrating advanced technologies that enable seamless access to a wide range of channels and services.

One of the main features of both the HIRD-E11 and HIRD-E25 is their support for high-definition (HD) programming, which provides viewers with crystal-clear images and vibrant colors. These receivers are engineered to decode HD signals, allowing subscribers to enjoy premium content in stunning resolution. The HIRD-E25, in particular, offers enhanced capabilities, including 4K video output for an even more immersive viewing experience.

Another notable characteristic of these receivers is their multi-room capabilities. With the installation of additional units, users can watch different channels in various rooms simultaneously, making it an ideal solution for families or households with multiple television sets. This convenience is further enhanced by the use of DirecTV’s Whole-Home DVR system, which enables seamless recording and playback of shows across multiple devices.

The HIRD-E11 and HIRD-E25 are equipped with advanced digital tuners, ensuring better signal reception and reducing the likelihood of interruptions due to weather or other environmental factors. Additionally, the receivers come with built-in support for a wide range of audio formats, including Dolby Digital, ensuring that viewers receive high-quality sound to complement their visual experience.

In terms of usability, these models are designed with user-friendly interfaces that make channel navigation and program selection intuitive. The remote controls are also thoughtfully designed, featuring dedicated buttons for quick access to popular features and functionalities, including the guide, record options, and search capabilities.

Moreover, the HIRD-E25 includes enhanced connectivity options, such as HDMI, USB, and Ethernet ports. This allows users to connect their receivers to a variety of external devices, including gaming consoles and streaming devices, further expanding their entertainment options.

In summary, the DirecTV HIRD-E11 and HIRD-E25 satellite receivers stand out for their combination of high-definition video support, multi-room functionality, advanced tuners, and user-friendly features. With these models, DirecTV continues to provide robust solutions that meet the growing demands of modern television audiences.
Top Page Image Contents