DirecTV HIRD-E25 Limits, Places to go from the LIMITS screen, Demo Mode, Factory Defaults

DIRECTV PLUS SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER’S MANUAL

Demo Mode

The Demo Mode is a feature that is primarily intended for in-store presentations. When enabled, the digital satellite receiver will step through a variety of features and display messages decribing these features. While pressing any key will allow you to regain operation of your digital satellite receiver, this is only temporary. After several minutes of non-interaction, the demonstration will begin again. To stop the demonstration mode permanently, disable the Demo Mode via this button.

Factory Defaults

If you ever want to reset the digital satellite receiver preferences, select the Factory Defaults button.

Limits

The LIMITS screen provides settings to help you control the viewing restrictions of satellite programming. These limits, when accompanied by the CHANNEL

LISTS, put a great degree of control in your hands.

For the TV Timer, Rating and Spending limits to be enforced, the digital satellite receiver must be locked, as described earlier in this chapter.

Places to go from the LIMITS screen

The LIMITS screen

TV Timer

The TV Timer is only available on the HIRD-E2 digital satellite receiver.

When you select TV Allow, the TV TIMER screen will be presented. If your receiver is locked, you will need to enter your passcode to access this screen.

From the TV TIMER screen you can specify the hours that satellite programming can be viewed on your receiver. This is done by highlighting each of the days you wish to control and pressing . After selecting a day of the week, you can set an acceptable start and end viewing period or a total viewing duration.

The TV TIMER screen

PAGE 7-10