Dish Network 104333 C ONTROLLING SOUND V

CONTROLLING SOUND VOLUME

RECEIVER VOLUME CONTROL

The receiver may have its own volume control. When you first install

such a receiver, it is set up so that the remote cannot control the

receiver sound volume. You can set up the receiver so that the remote

can control the receiver sound volume.

Note: You should use the receiver remote to control the sound

volume for normal viewing. But, if you are recording a program using

a VCR, and you change the sound volume using the receiver remote,

the volume recorded also will change. So, you may want to set up the

receiver so that only the TV remote can control the sound volume.

Then, when you use the TV rem o te to change the volume, the volume

recorded will not change. When you are finished recor di ng, mak e sure

to change the receiver setup back so that the receiver remote can

control the sound volume.

To change the way sound volu m e is c ontrolled, do the following:

Note: This procedure shows examples of menu options. The options

that you see may differ.

1.Use the TV remote control to make sure that the TV sound

volume is not turned down or muted.

Note: If you turn down or mute the TV so und vo lume using th e

TV remote, the receiver remo te cannot restore the volume even

if the receiver is set up so that the remote should be able to do so.

2.Press the Menu button.

3.Select the System Setup option.

4.Select the Volume Control option.

Note: If the System Setup menu does not

display this option, the r eceiver does not have

its own volume control.

5.Select the TV remote volume control or the

DISH remote volume c ont rol option.

6.Select the Save option.

7.If you are setting up the remote control for the first time, see

Controlling a Device on page15. In step 4 of that procedure,

use code 222 in TV mode to set up the remote to control the

receiver, including the receiver sound volume.