Dish Network 104333 INSTALLING BATTERIES IN THE R, R EMOTE CONTROL M

INSTALLING BATTERIES IN THE

REMOTE CONTROL

The remote control comes with AAA batteries,

packaged separately. When you replace old batteries,

you should replace all of the batteries. Use batteries

of the same grade, for example, alkaline or carbon

zinc, and do not mix batteries of different grades.

Alkaline batteries provide longer battery life.

1.Press down on the slot in the battery cover

(on the back of the remote control) and slide

the cover off.

2.Insert the new batteries, making sure to match

the plus (“+”) ends with the plus markings

on the battery case.

3.Replace the battery cover by sliding the cover

back up into place.

REMOTE CONTROL MODES

To use the remote to control a d e vice such as the satellite receiver or a

TV, you must first set up the remote to control the device, and then set

the remote to the right m o d e fo r th at device.

1.Set up the remote to contro l the device. See Controlling a Device

on page15 for instructions.

2.Use the remote control mode buttons, SAT (satellite receiver),

TV, VCR (for a VCR or a DVD player), and AUX (“auxiliary,”

for a cable TV box, a tuner, or an audio amplifier) to set the

remote to the right mode for the device. To change the mode

setting, press the button for the device that you want the remote

to control. The mode button’s back light turns ON to show that

the remote is set to that m o d e .

The following sections describe how to use the

remote control buttons. Each secti on desc ri be s only

the buttons that work in one remote control mode,

for example SAT mode or TV mode.