Dish Network 167820, 6.4 SWITCHING BETWEEN TV AND AMPLIFIER VOLUME C

7
SWITCHING BETWEEN TV AND AMPLIFIER VOLUME
CONTROL
When you set up the remote to control a TV, the MUTE and VOLUME
buttons control the TV volume, even if your remote control is in SAT
mode. However, if you want to use the AUX mode to control a tuner or
amplifier that has a volume setting, you can set up the remote to control
the tuner or amplifier’s volume instead of the TV volume while your
remote control is in SAT mode. Follow the instructions in the left
column to switch controlling volume in AUX mode. To change back to
controlling the TV volume in SAT mode, follow the instructions in the
right column.
7Turn the equipment back
on and try some other
buttons to make sure they
work.
Press POWER to turn the
equipment back on. Try some
other buttons to make sure they
work. Sometimes POWER
works when other buttons
don’t.
8If necessary, repeat this
procedure until you’ve tried
all the codes.
You may need to repeat the scan
to find the best code for your
equipment.
9Once you find a code that
works, consider using
Limited Mode.
See page S-6, Placing Your
Remote in Limited Mode for
putting your remote in Limited
Mode.
Control Amplifier Volume Control TV Volume
1Press and hold the AUX
mode button for three
seconds, and then let go of
it. The AUX mode button
blinks.
1Press and hold the TV
mode button for three
seconds, and then let go of
it. The TV mode button
blinks.
2Press the POUND (#)
button. 2Press the POUND (#) button.
Instructions Additional Information