13
CHANGING THE UHF FREQUENCY USING THE A/B SWITCH—DISH PLAYER-DVR 942, DUO VIP 222, DUODVR VIP 622 DVR, AND DUODVR VIP 722 DVR ONLY
Your remote has a switch to change the UHF frequency that your
remote control uses. It comes preset to the A position but you can
change the setting to the B position to lessen the likelihood of any other
UHF remote interfering with yours.
1Remove the battery cover from the remote control.
2Use a small screwdriver or a paper clip to carefully
change the setting.
3Put the battery cover back on the remote control.
4Use the SYSTEM INFO button on the front panel
to open the System Info screen.
5Press RECORD on the remote control.
6Make sure the remote address on the System Info
screen shows the correct band information:
•Switch Position A—IR/UHF Pro Band A
•Switch Position B—IR/UHF Pro Band B
All receiver models, except the DISH Player-DVR
942, ViP 222, ViP 622 DVR, and ViP 722 DVR,
must use switch position A or the remote does not
control the receiver.
Battery
A
B