8
PROGRAMMING THE REMOTE TO CONTROL A SECOND RECEIVER IN AUX MODE
If you have another DISH Network satellite receiver installed, you can
use this remote in AUX mode to control it along with your new
receiver. When you program the remote to control the other receiver,
the remote sends out IR and UHF (not UHF Pro) signals to the receiver.
You can program the remote to control any other DISH Network
satellite receiver, except for following:
•TV2 on Duo 322, DuoDVR 522 (also known as DISH Player-
DVR 522), DuoDVR 625 (also known as DISH Player-DVR
625), DISH Player-DVR 942, Duo ViP 222 (also known as ViP
222), DuoDVR ViP 622 DVR (also known as ViP 622 DVR) ,
and DuoDVR ViP 722 DVR (also known as ViP 722 DVR)
•DishPlayer 7100/7200
1Turn on the other receiver. Use the SYSTEM INFO button on the
front panel to open the System Info screen.
3Press the plus (+) side of
the VOLUME button. 3Press the plus (+) side of
the VOLUME button.
4Press the 0 number button. 4Press the 0 number button.
5Press the POUND (#)
button. 5Press the POUND (#)
button.
The AUX mode button
flashes three times. The TV mode button
flashes three times.
MAKE SURE THE REMOTE
CONTROLS THE AMPLIFIER’S
VOLUME:
MAKE SURE THE REMOTE
CONTROLS THE TV’S VOLUME:
6Press the SAT mode
button. 6Press the SAT mode
button.
7Press the plus (+) and
minus (-) sides of the
VOLUME button.
7Press the plus (+) and
minus (-) sides of the
VOLUME button.
8The equipment’s volume
changes and the AUX mode
button lights instead of the
TV mode button.
8The TV’s volume changes
and the TV mode button
lights instead of the AUX
mode button.
Control Amplifier Volume Control TV Volume